Thank you for choosing Pintech, the ultimate in electronic percussion. To
ensure that you will enjoy your Pintech products with years of trouble free
operation, we recommend that you carefully read this operation guide before
starting.
Taking Care of Your E-Drum Set
Your e-drum set will give you years of playing pleasure if you follow the rules shown below:
Location
Do not expose the unit to the following
conditions to avoid deformation, discoloration,
or more serious damage.
o
Direct sunlight.
High temperature (near a heat source, or in acar during
the day time)
o
Excessive humidity
o
Excessive dust
o
Strong vibration
o
Disconnect all cables before moving the kit.
o
Physical shocks caused by dropping, bumping, or
placing heavy objects on the instrument can result
in scratches and more serious damage.
Power Supply
o
Turn the power switch OFF when the instrument is not
in use.
o
If an AC adaptor is used, it should be unplugged from
the AC outlet if the instrument is not to be used for an
extended period of time.
o
Unplug the AC adaptor during electric storms.
o
Avoid plugging the AC adaptor into the same AC outlet
as appliance with high power consumption, such as
electric heaters or ovens. Also avoid using multi-plug
adaptors since these can result in reduced sound
quality, operation errors, and possibly damage.
Cleaning
o
Clean the module with a soft dry cloth.
o
A slightly damp cloth may be used to remove
stubborn grime and dirt.
o
Never use cleaners such as alcohol or thinner.
o
Avoid keeping vinyl objects in contact with the
unit as it may stick and/or cause discoloration.
Turn Power OFF When Making
Connections
o
To avoid damage to the module and other devices to
which it is connected, turn the power OFF on all
devices prior to connecting or disconnecting cables.
Electrical Interference
o
This is an electronic instrument may cause
interference if placed too close to radios or
television sets. If this occurs, separate the
affected devices.
Handling and Transport
o
Never apply excessive force to the controls,
connectors or other parts of the instrument.
o
Always unplug cables by gripping the plug firmly,
but not pulling on the cable.