Pinnacle MovieBox DV, Quick Start Manual

Page: 11 / 78

Quick Start Guide
7
E
nglis
h
U
SER
I
NTERFACE
/ C
ONTROLS
LEDs
Your MovieBox DV has one green LED for each video source (S video,
Composite video, DV Port A, DV Port B). The two LEDs used for the DV
ports are both enabled if the DV mode is selected as input via the source
select button. The two LEDs are both „off“ if S-video or Composite video
are used as input. Make sure that the Power LED is „on“ when you start
working with the MovieBox DV.
Mode Select / Reset
Via the Mode Select Button you can toggle between the different video
sources, e.g. ”DV to analog video”, one click ”Composite to DV”, next
click ”S-video to DV”, one more click ”DV to analog video”, ... .
The Reset button resets the MovieBox DV to the last selected operating
mode.
Note: If you switch on or reset the MovieBOX DV it takes a few seconds
until it starts in the last selected operating mode.
Now, have some fun…
Now that you have installed Studio and Movie Box DV, you can use it
immediately. We strongly recommend you to take this opportunity to
experience Studio digital video editing.
Mode Select
Reset