5
NEVER LEAVE HEATER UNATTENDED WHILE BURNING OR WHILE
CONNECTED TO A POWER SOURCE
© 2019 Pinnacle Climate Technologies, Inc.
Kerosene Forced Air Heater User’s Manual
®
ASSEMBLY INSTRUCTIONS (140T-KFA / 175T-KFA / 215T-KFA)
1. Tilt the heater tank backward and attach the bot-
tom skid by inserting the skid into the button spring
clips at the front of the bottom support frame.
2. Attach the axle supports by inserting them into the
button spring clips at the rear of the bottom sup-
port frame.
3. Insert the axle through the holes in the axle supports.
4. Slide the spacers onto the axle.
5. Slide the wheels onto the axle and secure with the
axle nuts.
6. Attach the front handle by inserting the handle
into the button spring clips at the front of the top
support frame.
7. Attach the rear handle by inserting the handle into
the button spring clips at the rear of the top sup-
port frame.
8. Check all parts to ensure they are secure before
operating the heater.
SPECIFICATIONS
Model #
45-KFA
80T-KFA
140T-KFA
175T-KFA
215T-KFA
Rating: Btu/Hr / kW
45,000 / 13.2 80,000 / 23.4
140,000 / 41
175,000 / 51.3
215,000 / 63
Fuel Consumption: Gal/Hr / L/Hr
0.35 / 1.3
0.63 / 2.38
1.10 / 4.16
1.34 / 5.1
1.63 / 6.2
Fuel Tank Capacity: Gallons / Liters
5 / 19
5 / 19
10 / 38
13 / 49
13 / 49
Pump Pressure: psi / BAR
3.0 / 0.21
4.2 / 0.29
6.6 / 0.46
7.5 / 0.52
9.0 / 0.62
Volts: AC/Hz
120VAC / 60Hz
120VAC / 60Hz
120VAC / 60Hz
120VAC / 60Hz
120VAC / 60Hz
Amps
1.4
1.5
2.4
2.7
2.8
Phase
Single
Single
Single
Single
Single
Specifications subject to change without notice.
FEATURES
Hot Air Outlet
Upper Shell
Handle
Extension Cord Wrap
Fan Guard
Pressure Gauge
Fuel Gauge
Fuel Cap
Power Cord
Fuel Tank
Power/Reset Switch
Thermostat Knob
(80T KFA Only)
Lamp
Lower Shell
Upper Shell
Power
Cord
Drain Bolt
Fuel Tank
Pressure
Gauge
Fan Guard
Rear Handle
Digital Temperature
Display
Lamp
Thermostat
Knob
Fuel Cap
Fuel Gauge
Lower Shell
Hot Air
Outlet
Front
Handle
Figure 1
Axle
Axle Nut
Spacer
Tire
Axle Support