2
Programming the Hunter-Pro series with an LED keypad
PIMA Electronic Systems Ltd. does not represent that its product may not be compromised and/or
circumvented, or that the Product will prevent any death, personal and/or bodily injury and/or damage to
property resulting from burglary, robbery, fire or otherwise, or that the Product will in all cases provide
adequate warning or protection. The User understands that a properly installed and maintained equipment
may only reduce the risk of events such as burglary, robbery, and fire without warning, but it is not
insurance or a guarantee that such will not occur or that there will be no death, personal damage and/or
damage to property as a result
.
PIMA Electronic Systems Ltd. shall have no liability for any death, personal and/or bodily injury and/or
damage to property or other loss whether direct, indirect, incidental, consequential or otherwise, based on a
claim that the Product failed to function
.
Please refer to a separate warranty statement found on PIMA website at:
http://www.pima-alarms.com/site/Content/t1.asp?pid=472&sid=57
Warning:
The user should follow the installation and operation instructions and among other things test the
Product and the whole system at least once a week. For various reasons, including, but not limited to,
changes in environment
Warning: The user should follow the installation and operation instructions and among other things test the
Product and the whole system at least once a week. For various reasons, including, but not limited to,
changes in environment conditions, electric or electronic disruptions and tampering, the Product may not
perform as expected. The user is advised to take all necessary precautions for his/her safety and the
protection of his/her property
.
Copyright © 2009 by PIMA Electronic Systems Ltd. All rights reserved
.
INDEX
1.
Introduction..................................................................................... 3
2.
Programming ................................................................................... 3
2.1
The LEDs .........................................................................................4
2.2
Hex to Binary conversion table...........................................................5
3.
Programming examples .................................................................. 5
3.1
Displaying a number .........................................................................5
3.2
Setting a discrete parameter’s values .................................................6
3.3
Example: setting ‘Mains fault delay time’ ............................................6
3.4
Set zone #3 to be a 24 Hrs zone........................................................9
4
.
The Parameters Table.................................................................... 11
Contact Us
:
PIMA Electronic Systems Ltd.
5 Hatzoref Street, Holon 58856, Israel
Tel: +972.3.6506414 Fax: +972.3.5500442
Email:
Web:
http://www.pima-alarms.com
Partner’s website:
http://www.pima-alarms.com/site/modules/login.asp
