background image

 
 

HUNTER-PRO RSA Intruder Alarm System - User Manual for LCD keypads 

 

29

 

 

“-“ to “+” and vise versa, and 

 

 keys to scroll back/forth between 

partitions.  

 

NOTE: 

Marking “+” above partition number will activate that partition with feature. “-“ will not. 

Press 

 to save programming and move to the next screen. 

4.4

 

Private Dialer Telephone Numbers 

HUNTER-PRO RSA system has four private dialer telephone numbers. 
The dialer will dial each phone number in two sets (i.e. total of 8 attempts) 
and trigger an alarm warning sound, when the call is ‘picked’. After the 

warning sound is over, the system awaits for remote-controlled commands 
that can be transmitted via the telephone used by the system. The system 
shall hang-up after a minute of not receiving any command (Remote 

Control via Touch-tone Phone on page 17).  

 

NOTE: 

In case a Voice-Unit is connected to the system, once the call is picked-up, there is 

a recorded message, and not a warning sound. 

The dialer aborts the dialing attempts in the following cases: 

 

The system’s status changes from ON to OFF 

 

A “Stop Dialer” command was received via telephone. The first Private Dialer 
User that gives an ‘abort’ command causes the other Private Dialer Users in 

the phone list will not receive the system’s report. 

 

All Private Dialer Telephone Numbers have been dialed twice 

4.4.1

 

Programming Telephones 

It is possible to combine the process of entering/deleting/changing 

programmed telephone numbers once in the Telephone Menu. 

Summary of Contents for HUNTER-PRO RSA









































Reviews: