HUNTER-PRO RSA Intruder Alarm System - User Manual for LCD keypads
17
NOTE:
If the system does not turn to Disarm state, make sure that the time is included in
the preset time frame that enables disarming the system (see section 4.1.2.5 in
“Programming User Codes”)
3.3.2
Disarming the System with Master Code
)
Master Code
User Menu
Choose 1,2...
)
3.4
Remote Control via Touch-tone
Phone
The alarm system can be remote-controlled via any touch-tone telephone,
including cellular phone. The system can be controlled from the moment
there is communication between the system and the telephone, whether
the system called the telephone, or when initiated by the user as following
described.
1.
Dial the telephone number the system is connected to
2.
Wait for the system’s confirmation tone (a long tone followed with
two beeps)
3.
Enter Master Code (note
NOT
to enter the code before the end of
the confirmation tone)
4.
Wait a few seconds until the alarm system confirms its status,
using one of the two following tones:
Continuous tone:
System disarmed
Beep
System armed
Summary of Contents for HUNTER-PRO RSA
Page 40: ...P N 4410211 Rev A Sep 2005...
