HUNTER-PRO RSA Intruder Alarm System - User Manual for LCD keypads
18
NOTES:
The system will not identify commands from the telephone while sounding
the confirmation tone. It is important to wait until to confirmation tone is
over before pressing the telephone keys that control the system.
The alarm system confirms the command was received by two short beeps.
There are two modes for controlling the system, as set by the technician
3.4.1
MODE A - One touch control
5.
Execute command by pressing a key on the phone.
The following table includes system’s commands by phone keys:
Phone key:
Function:
1
Arm
the
system
2
Disarm the system
4
Arm the system in “Home 1” mode
5
Switch on the Relay
6
Switch off the Relay
7
Arm the system in “Home 2” mode
8
Listen in (only available with a MIC-200)
0
Disables siren and dialer (in case of an alarm)
3.4.2
MODE B - Enhanced control
IMPORTANT!
To activate each of the outputs:
)
N
& allocated phone keys
To deactivate each of the outputs:
)
K
& allocated phone keys
Summary of Contents for HUNTER-PRO RSA
Page 40: ...P N 4410211 Rev A Sep 2005...
