HUNTER-PRO Series & CAPTAIN 8 User Guide
11
4
TEMPORARILY BYPASSING OPEN
ZONES (KEY #3)
•
Bypassing zones reduces the safety of your protected premises: a
bypassed zone does not sound the alarm when violated, nor does it
report the monitoring station!
•
It should be used carefully, only if there is no alternative and only for
the shortest possible time.
•
If you bypass a zone due to a fault, a service technician should
be called;
•
Beware not to bypass zones unintentionally;
•
Zones can be bypassed only when the system is disarmed;
•
Temporarily bypassed zones are automatically reinstated when the system is disarmed.
•
The letter “B” in “Fast zone display" mode indicates a bypassed zone.
•
A service technician can permanently bypass a zone, such in the case of a zone that no
longer needs to be protected
4.1
When arming
User code
to temporarily bypass the open zone/s
....
-OR-
to cancel arming
•
When you try to arm the system and a 24-hour zone
2
is open, the keypad sounds beeps
and the message “Open Zone! Press END or Bypass”, with the zone/s details, is displayed
in two intermittently changing screens.
•
If you do not cancel arming or bypass the open zones, when the Exit delay ends the
system will be armed, but the open zones instantly sound the alarm.
•
Exit delayed zones are such, so they can be left open until the EXIT delay time ends.
4.2
Prior to arming
•
You can temporarily bypass zones in advance of arming the system.
As a precaution, there is a time limit, set by the Installer, for a zone to be
bypassed prior to arming. When this time ends and the system has not been
armed yet, the zone is automatically reinstated.
2
24-Hour zones sound the alarm whenever they are violated, regardless of the system status.
3
3
3
3
BYPASS
Ar mi n g . . .
Ex i t De l a y 6 0
Sy s t e m Ar me d !
END
END
END
END
