Captain 6 Installation Guide
26
You can set an interval as well as daily tests.
5.2.4
GSM-200 cellular module
Technician code
Select:
CPTN XX en 6.10
Subscriber I.D
ENTER/NEXT/END
X9
GSM Unit
ENTER/NEXT/END
GERTP GSM Exists
-----
set the module’s parameters
GSM Pre Number
set a prefix number where required
By default, the GSM module uses the same account ID as the PSTN channel.
For information on how to install the GSM-200, turn to the GSM-200 Installation guide.
The GSM-200 parameters are:
Par.
Onscreen
When settings to “+/-”...
G
GSM Exist
The GSM-200 is installed
E
Open Rep. Imd
“+”: Arming/Disarming reports will be sent via the GSM module
after one PSTN failure
“-”: Arming/Disarming reports will be sent via the GSM module
only after 4 successive PSTN failures
Regardless of parameter
“E”
,
when the alarm system
fails to report via the PSTN channel, the events are
immediately transmitted via the GSM one, until the
PSTN channel is reinstated.
R
Radio Account
“+”: The GSM reports will be sent with the Radio account I.D.
“-”: The GSM reports will be sent with the PSTN account I.D.
T
Automatic Test Automatic test reports will be sent via the GSM module too
P
Parallel (report) All PSTN reports will be sent via the GSM module too
5.2.4.1
GSM pre number
Set a pre number (prefix) if the GSM module dials over a switchboard or phone system, or as
an area code.
ENTR
ENTR
ENTR
ENTR
ENTR
