background image

Introduction

Operating Manual PSS u2 B1, PSS u2 B4
1003626-EN-01

4

1

Introduction

1.1

Validity of documentation

This operating manual explains the function and operation, describes the installation and
provides guidelines on how to connect the product.
This documentation is valid for the product PSS u2 B1/B4. It is valid until new documenta-
tion is published.

1.1.1

Retaining the documentation

This documentation is intended for instruction and should be retained for future reference.

1.2

Definition of symbols

Information that is particularly important is identified as follows:

DANGER!

This warning must be heeded! It warns of a hazardous situation that poses
an immediate threat of serious injury and death and indicates preventive
measures that can be taken.

WARNING!

This warning must be heeded! It warns of a hazardous situation that could
lead to serious injury and death and indicates preventive measures that can
be taken.

CAUTION!

This refers to a hazard that can lead to a less serious or minor injury plus
material damage, and also provides information on preventive measures
that can be taken.

NOTICE

This describes a situation in which the product or devices could be dam-
aged and also provides information on preventive measures that can be
taken. It also highlights areas within the text that are of particular import-
ance.

Summary of Contents for PSS u2 B1





















Reviews: