Installation
Operating Manual PSS u2 B1, PSS u2 B4
1003626-EN-01
16
1. Remove the yellow cover
plate from the head module.
2. Attach the yellow ESD cover
plate to the last backplane.
5.5
Install shield connection element (optional)
A shield connection element can be installed on the 4x backplane as an option. The shield
connection element generates the direct contact to the mounting rail. The shield connection
element is not supplied with the device; see chapter entitled
Accessories [
19]
).
1. Attach the shield connection
element to the rear of the
backplane and push it in the
direction of the arrow that is
shown until it clicks in place at
the locations indicated by the
arrows.
