Pilz PSS 3075-3 Series, Manual

Page: 27 / 98

2-17 Operating Manual: PSS 3075-3 Series
Key:
1: 4-digit display
2: LEDs for PSS operating mode and supply voltage
3: 3-position switch for selecting the standard section’s operating mode
4: Button for scrolling the error stack
5: 2-position switch for selecting the failsafe section’s operating mode
6: Programming device interface
RS 232 (minimum configuration: TxD, RxD, GND)/RS 485
7: User interface
RS 232/RS 485
8: Pushbutton for switching on and off the RS 485 termination on the
user interface
9: Supply voltage connection (24 VDC) for internal supply of the
safety system and the outputs at X1, X2
10: Digital outputs and test pulse outputs
11: Digital inputs
12: Functional earth connection
13: Supply voltage connection (24 VDC) for outputs at X8, X9
14: LED for data transfer errors
15: Rotary switch for setting the node number Bit rate (1st rotary switch)
and the Node-ID (2nd rotary switch)
16: LED for CPU status
17: LED for the CANopen data cable status
18: CANopen interface
19: Labelling strip for Ethernet address
20: SafetyBUS p interface
21: LED for status of SafetyBUS p
22: ETH-2 interface with connection to ETHERNET via integrated switch
(2 free ports); LEDs on each port for
- Status of network connection (LINK)
- Status of data traffic (TRAFFIC)
INFORMATION
Please refer also to the manual: “CANopen for Compact 3
rd
Generation
PSS” and “ETH-2 for Compact 3
rd
Generation PSS”.