Installation
Operating Manual PMI v704e/v707e
1003980-EN-02
19
5.3
Installing the unit
When installing the device, please note the following:
}
For reasons of stability, the front panel, console or control cabinet should have a wall
thickness of at least 2.5 mm. The wall thickness may be maximum 5 mm.
}
To avoid a build-up of heat, a distance of a 10 cm/3.94" should be maintained all round
the system.
}
Note the information given for the ambient and operating temperatures in the
Technical
details [
36]
.
}
IP65 protection can only be guaranteed when
– the device's fixing screws are tightened with a torque of 1 Nm
– the gasket is not damaged
– the mounting position is vertical (the Pilz logo has to be at the bottom)
– the wall thickness is at least 2.5 mm.
