PIT si3.1
Operating Manual PIT si3.1
21864-EN-03
6
Disposal
}
When decommissioning, please comply with local regulations regarding the disposal of
electronic devices (e.g. Electrical and Electronic Equipment Act).
Unit features
}
Indicator light unit to signal various operating and plant statuses
}
Scope of supply:
– Indicator light unit
Red, yellow and green including LED
– Mounting foot
– Conduit pipe (250 mm)
– 1 x flat gasket
1 x O-ring gasket
– Safety screw (3.5 x 16 mm)
Function description
The red and green light element on the indicator light unit is used to signal various operat-
ing and plant statuses (e.g. detection zone violation on SafetyEYE).
The yellow light element on the indicator light unit is used to signal process errors and
warning zone violations.
Installation and wiring
NOTICE
The indicator light unit should be positioned so that operating personnel can
see it at all times from every working position.
Installation
Installing the mounting foot:
INFORMATION
Make sure it is properly secured! When selecting the fixing material, con-
sider the composition of the surface beneath the assembly (e.g. ceiling,
steel girder) as well as the environment (e.g. vibration).
}
Drill holes in the surface beneath the assembly, as shown in the diagram "Preparing for
installation, mounting foot dimensions and conduit pipe" [1].
Don't forget to drill a hole for the cable feed [2]!
}
When installing, use the flat gasket provided [2]!
