background image

PIT si3.1

Operating Manual PIT si3.1
21864-EN-03

5

INFORMATION

This gives advice on applications and provides information on special fea-
tures.

Safety

Intended use

The indicator light unit is intended to signal various operating or plant statuses (e.g. for
SafetyEYE).
The following is deemed improper use in particular:

}

Any component, technical or electrical modification to the product

}

Use of the product outside the areas described in this manual

}

Use of the product outside the technical details (see chapter entitled "Technical de-
tails").

Safety regulations

Use of qualified personnel

The products may only be assembled, installed, programmed, commissioned, operated,
maintained and decommissioned by competent persons.
A competent person is a qualified and knowledgeable person who, because of their train-
ing, experience and current professional activity, has the specialist knowledge required. To
be able to inspect, assess and operate devices, systems and machines, the person has to
be informed of the state of the art and the applicable national, European and international
laws, directives and standards.
It is the company’s responsibility only to employ personnel who

}

Are familiar with the basic regulations concerning health and safety / accident preven-
tion,

}

Have read and understood the information provided in this description under "Safety"

}

Have a good knowledge of the generic and specialist standards applicable to the spe-
cific application.

Warranty and liability

All claims to warranty and liability will be rendered invalid if

}

The product was used contrary to the purpose for which it is intended

}

Damage can be attributed to not having followed the guidelines in the manual

}

Operating personnel are not suitably qualified

}

Any type of modification has been made (e.g. exchanging components on the PCB
boards, soldering work etc.).

Summary of Contents for PIT si3.1












Reviews: