PIT si3.1
Operating Manual PIT si3.1
21864-EN-03
7
[1]
[2]
[3]
Flat gasket
Fig.: Preparing for installation, mounting foot dimensions and conduit pipe
Attaching the conduit pipe to the mounting foot:
}
Cut the conduit pipe [3] to the required length (minimum length: 60 mm).
}
Insert the O-ring gasket on to the mounting foot's pipe entry point.
}
Fit the conduit pipe to the mounting foot. Use the safety screw to secure the conduit
pipe from underneath the mounting foot.
Attach the connection unit to the mounting foot:
}
Separate the light elements from the connection unit. The light elements are fastened
via bayonet connections.
}
Place the connection unit on to the conduit pipe and attach the connection unit using
the cross head screw [7].
CAUTION!
Press down firmly when tightening the screw!
Attach the connection cable for the light elements:
}
Guide the connection cable for the light elements through the conduit pipe [3] and
through the cable feed in the mounting foot.
}
Refer to the diagram "Wiring the connection unit and assembling the light elements" for
details of how to wire the light elements.
Wiring
CAUTION!
Wire the indicator light unit when it is isolated from the power supply.
