_______________________________________________________________________________
20 of 19
Navod obsl OR 50(F)_2006-08-01_EN.doc
6.
Lubrication, Cleaning, Maintenance
Grinding dust develops during grinding; therefore, it is very important to observe
recommendations concerning lubrication.
Current maintenance of the grinding machine should be always done daily after finishing
the work.
Remove grinding dust from the protective shield and the grinding disk cover space.
Clean the grinding disk bottom and remove dust from all parts.
Apply grease to sliding bearings on the arm /11/, setting screws /8,9,4/.
Cut the machine off the mains securing it
against starting before you begin the work
(lubrication, cleaning, maintenance)
