PIKO BR 95 Instruction Manual Download

Page: 5 / 16

Initial Operation

We recommend letting the locomotive
run without a train for 30 minutes
in both directions, to properly break
it in. This will help achieve optimal
performance and longevity for the
locomotive.

Of course, your model

should only be run on smooth and
perfectly clean tracks with reliable
electrical contact to all track
sections.

Smoke Unit Operation and Care

Drop about 10 to 20 drops of smoke
fluid into the top of the smokestack.
If over-filled, the smoke generator
will not work. Turn the loco upside
down to drain out excess smoke fluid.
Never insert any object down into the
smokestack. The heating element in
the center of the stack is delicate and
easily broken by foreign objects. Use
only PIKO smoke fluid to preserve the
life of the smoke generator. There is
no harm in leaving smoke fluid in the
smoke generator or in letting the the
loco run without fluid in the smoke
generator.

Technical Data
Power Supply

The model should only be operated
on a pure, filtered DC power supply
of 0 to 24 volts, with a capacity of
2 - 5 Amp and a fast-acting fuse or
circuit breaker to protect against short

circuits. Do not use a power supply
which is not in safe and perfect
working condition. (See “Digital
Decoder” instruction for operation on
digital power.)

Drive System

The model contains 2 high capacity
motors, that are connected through
robust gearing to 4 axles.

Lighting

The model is equipped with an
automatic directional headlight, using
white LEDs for a realistic appearance.
The “front” lights are illuminated
according to the travel direction.

Precautions and Recommendations
Minimum Radius

The locomotive can run on tracks with
a radius of 600 mm (23.62“). Due to
the design a minimum radius of 920
mm (36.28“) is recommended. Natu-
rally, extended operation on small
radius curves leads to greatly increa-
sed wear of the locomotive and track.

Digital Decoder

The model locomotive is prepared for
“plug and play” installation of a PIKO
# 36122 loco decoder (available
separately). As soon as the decoder
is properly installed, the locomotive
can be operated on digital as well as
Analog DC-powered layouts.

Sound Module

Only the model is prepared for “plug
and play” installation of a PIKO # 36228
Sound Unit (available separately). This
reproduces authentic sounds. It requires
that the loco be equipped with a PIKO
# 36122 decoder. The sound unit must be
connected to the decoder via the included
interface cable. The sound unit includes
a high-quality extended frequency range
speaker with a waterproof diaphragm for
outdoor operation. Note: The sound unit
is operable only on digital layouts, not on
analog DC-powered layouts.

Maintenance
Lubrication

After each 25 hours of operation, and
after any long periods of storage, please
lubricate the locomotive‘s gears with a
sparing amount of plastic-compatible,
non-hardening grease (e. g. Lubricating
Grease PIKO no. # 36216).

Cleaning

If cleaning is necessary, use only a
mild cleaning agent (such as soap and
water) and gentle action with a soft
non-abrasive cloth or brush. Never
immerse the loco in liquid or “flood”
any internal parts!

Normal Wear Items

Electrical pick-up shoes, wheel wipers
and traction tires will wear with use
and should be replaced as needed.

Please Note! Damage to Carpets and
Other Surfaces: Normal operation of the
locomotive causes wear of mechanical
parts (wheels, electrical pickups etc.). This
produces carbonized dust, grease and
oil, which can permanently stain carpets,
wood floors and other materials. It is
the user’s responsibility to take proper
precautions against this damage. Wipe
any grease or oil from the track rails with
a clean soft cloth. PIKO Spielwaren GmbH,
as well as its representatives, distributors
and retailers, assume no liability for any
such damage.