PIKO 37210 Instruction Manual Download Page 5

Page: 5 / 16

Smoke Unit Operation and Care

Drop about 10 to 20 drops of smoke
fluid into the top of the smokestack. If
over-filled, the smoke generator will not
work. Turn the loco upside down to drain
out excess smoke fluid. Never insert any
object down into the smokestack. The
heating element in the center of the stack
is delicate and easily broken by foreign
objects. Use only PIKO smoke fluid to
preserve the life of the smoke generator.
There is no harm in leaving smoke fluid
in the smoke generator or in letting the
the loco run without fluid in the smoke
generator.

Technical Data
Power Supply

The model should only be operated on a
pure, filtered DC power supply of 0 to 24
volts, with a capacity of 2 - 5 Amp and
a fast-acting fuse or circuit breaker to
protect against short circuits. Do not use
a power supply which is not in safe and
perfect working condition. (See “Digital
Decoder” instruction for operation on
digital power.)

Drive System

The model contains a high capacity motor,
that is connected through robust gearing
to three axles.

Lighting

The model is equipped with an automatic
directional headlight, using white LEDs for
a realistic appearance. The “front” lights
are illuminated according to the travel
direction.

Precautions and Recommendations
Minimum Radius

The locomotive can run on track with a
minimum recommended radius of 600 mm
(23.62‘’). Naturally, extended operation on
small radius curves leads to greatly increa-
sed wear of the locomotive and track.

Digital Decoder

The model locomotive is prepared
for “plug and play” installation of a
PIKO SmartDecoder 4.1 #36125 (available
separately). As soon as the decoder is
properly installed, the locomotive can
be operated on digital as well as Analog
DC-powered layouts.

Sound Module

Only the model of the BR 64 is prepared
for “plug and play” installation of a
PIKO #36222 Sound Unit (available
separately).
This reproduces authentic sounds of the real
BR 64. It requires that the loco be equipped
with a PIKO SmartDecoder 4.1 #36125. The
sound unit must be connected to the decoder
via the included interface cable. The sound unit
includes a high-quality extended frequency
range speaker with a waterproof diaphragm
for outdoor operation. Note: The sound unit is
operable only on digital layouts, not on Analog
DC-powered layouts.

Maintenance
Lubrication

After each 25 hours of operation, and after
any long periods of storage, please lubricate
the locomotive‘s gears with a sparing
amount of plastic-compatible, non-hardening
grease (e. g. Lubricating Grease PIKO no.
36216).

Cleaning

If cleaning is necessary, use only a mild
cleaning agent (such as soap and water) and
gentle action with a soft non-abrasive cloth
or brush. Never immerse the loco in liquid or
“flood” any internal parts!

Normal Wear Items

Electrical pick-up shoes, wheel wipers and
traction tires will wear with use and should
be replaced as needed.

Please Note! Damage to Carpets and
Other Surfaces: Normal operation of the
locomotive causes wear of mechanical
parts (wheels, electrical pickups etc.). This
produces carbonized dust, grease and
oil, which can permanently stain carpets,
wood floors and other materials. It is
the user’s responsibility to take proper
precautions against this damage. Wipe
any grease or oil from the track rails with
a clean soft cloth. PIKO Spielwaren GmbH,
as well as its representatives, distributors
and retailers, assume no liability for any
such damage.