35018-90-7000
© 2019, PIKO Spielwaren GmbH
PIKO Spielwaren GmbH · Lutherstr. 30 · 96515 Sonneberg, GERMANY
in design, production, material or transportation inclusive of the service performance
connected with these defects. Any further claims are excluded.
Warranty claims become null and void
• when the defects are caused by wear and tear or by normal wear of parts subject to wear
and tear.
• when PIKO products have been converted with parts not authorized by the manufacturer.
• when the installation of specific electronic elements has been carried out by parties
notauthorized by the manufacturer for such an installation.
• when the product has been used in a manner not intended by the manufacturer.
• when the information in the operating instructions provided by the manufacturer has not
been followed.
Repair or replacement of a product does not extend its warranty period. Warranty claims
can be submitted directly to the seller, or the part to be submitted for warranty can be sent
directly to the firm of PIKO along with sales receipt and a summery of the problem(s) with
the product. Shipments have to be prepaid.
Given electrical and mechanical data as well as illustrations are without guarantee.
Mistakes of any kind are reserved. Given data is subject to change without notice.
REGULATORY INFORMATION:
1. FCC Information (USA):
This device contains FCC ID: WAP4110.
The device CYBLE-224110-00 complies with Part 15 of the FCC Rules. The device meets the
requirements for the modular transmitter approval as detailed in FCC public Notice DA00-1407.
Transmitter Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) This device must accept any interference received, including
interference that may cause undesired operation.
2. ISED Information (Canada):
This device contains IC: 7922A-4110.
The device CYBLE-224110-00 including the built-in chip antenna complies with Canada RSS-
GEN Rules. The device meets the requirements for modular transmitter approval as detailed in
RSS-GEN. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) This device must accept any interference received, including
interference that may cause undesired operation.
L‘appareil CYBLE-224110-00, y compris l‘antenne intégrée, est conforme aux Règles RSS-GEN
de Canada. L‘appareil répond aux exigences d‘approbation de l‘émetteur modulaire tel que décrit
dans RSS-GEN. L‘opération est soumise aux deux conditions suivantes: (1) Cet appareil ne doit
pas causer d‘interférences nuisibles, et (2) Cet appareil doit accepter toute interférence
reçue, y compris les interférences pouvant entraîner un fonctionnement indésirable.
3. MIC Japan
CYBLE-224110-00 is certified as a module with type certification number 203-JN0568.
4. KC Korea
CYBLE-224110-00 is certified for use in Korea with certificate number MSIP-CRM-Cyp-4110.
35018-90-7000_2019.indd 12
22.05.19 08:24
