First Free Channel Routing
This method is used if the word "trunk" is not found in the called party information, or if a valid letter (A,B,C,D) does not follow it.
In this case the first-free- channel in the ISDN group will be used to route the call.
6.4
ISDN Settings Screen
The ISDN Settings screen shown below is displayed when the user clicks on the ISDN Settings link in the navigation frame. The
ISDN Settings screen allows users to configure the Digital Gateway Board to either T1 or E1. It also allows the user to select the
desired values for the particular ISDN configuration. Note that when T1 is selected, the default values for a T1 setting will be
automatically displayed. When E1 is selected, the default values for E1 will be loaded.
Note: Clicking on the 'SAVE' button will save any changes to the configuration file, however, for any of
these changes to take effect, the gateway application must be stopped and restarted using the 'STOP'
and 'START' buttons on the System Status screen. A note next to the 'SAVE' button reminds the user
of this.
The 'Number of Interfaces' field is required since the Graphical User Interface cannot obtain this information unless the
Gateway application is running
.
Due to page size limitations, not all fields are shown in the figure.
PIKA FormulaT1/E1 Gateway 1.0 User Guide
6.4 ISDN Settings Screen
18
11/2/2007
6
