7
Located to the right of the digit, this LED lights up to indicate that audio has been recorded to a preset
bank. When changes have been made to a preset but not saved, the decimal point will blink. Once the
changes have been saved, the decimal point will return to solid.
Use only the 18-Volt, 300mA, negative-tip power supply that came with your Pigtronix Infinity 3. Using
the wrong power supply is likely to result in a damaged pedal.
Looper input 1. Use this input for mono sound sources.
Looper input 2. Use this input for the second input of a stereo signal, or a second instrument using
Input Split. When nothing is connected to Input 2, the signal from Input 1 is automatically passed to
Input 2.
Main output containing pass-through and loop audio. Use a standard (TS) ¼” instrument cable to
connect to an amp, mixer, or DI.
Decimal Point
DC Power
In 1
In 2
Out 1
Jacks
Multi-Segment Digit
This numeric display tells the user which preset is currently selected (within the selected bank) and
is also used to confirm firmware update “F”, and to indicate copy in progress “C” and USB active
“U” states.
In Varispeed mode a “-” is displayed. Its height represents the relative speed of the sample rate.
