11
When CUE / FADE is turned off, the button is not lit and audio will stop immediately when you push
the Stop footswitch.
When CUE is selected (RED), pressing the Stop footswitch will stop the loop audio when it reaches
the end of the current loop cycle.
When FADE is selected (GREEN), pressing the Stop footswitch will trigger a steady decrease in loop
audio in volume until the end of the current loop cycle.
All three of the above settings obey the ARM / ALL setting. In All mode, when audio has been
recorded on both Loop 1 and Loop 2, CUE and FADE actions will follow the length of Loop 2.
Holding down the CUE / FADE button turns the switch ORANGE and puts you into the Fade Multi
menu, allowing you to select how many loop cycles it takes to fade out using the rotary encoder.
The default sample rate for Infinity 3 is 48kHz.
When 24kHz is selected (RED), the looper runs at ½ speed.
When 12kHz is selected (GREEN), the looper runs at ¼ speed.
Holding down the SAMPLE RATE turns the switch ORANGE and activates the Sample Rate Interval
menu, allowing you to change the sample rate in real time using the rotary encoder.
Prior to recording audio, the Sample Rate can be set to 24kHz or 12kHz, allowing the user to increase
the sample rate after recording, causing the audio to speed up.
CUE / FADE
SAMPLE RATE
