piezosystemjena nano box USB, Instruction Manual

Page: 44 / 44

phone: +49 (3641) 66880 • fax: +49 (3641) 668866 • info@piezojena.com • http://www.piezojena.com
Appendix 41
default
-bit
Name [unit]:
Description Type:
Range Factory
Defaults
19 Upper voltage limit (OL) [V]:
This is the identifier of a value that defines the upper limit of the desired
voltage while the drift compensation is inactive. FPV:
0 ... 130 130
20 Lower position limit (CL) [%]:
This is the identifier of a value that defines the lower limit of the desired
position while the drift compensation is active. The value is expressed as a
percentage of the motion range of the actuator. FPV:
0 ... 100 0
21 Upper position limit (CL) [%]:
This is the identifier of a value that defines the upper limit of the desired
position while the drift compensation is active. The value is expressed as a
percentage of the motion range of the actuator. FPV:
0 ... 100 100
22 Automatic measurement report interval [s]:
This is the identifier of a value that defines the response interval of the
automatic measurement report. FPV:
0.1 ... 10 10
23 Slew rate [V/µs]:
This is the identifier of a value that defines the maximum slew rate of the
output voltage. FPV:
3e-9 ... 5e-3 0.005
24 reserved none none
25 reserved none none
26 reserved none none
27 reserved none none
28 reserved none none
29 reserved none none
30 reserved none none
31 reserved none none