RSE METER
Use and Maintenance Manual
PM Version
ENGLISH
ISV065UTE
Rev.8
Date of issue
04/06/2014
Revision
8
Revision date
20/07/2015
Page 30 of 32
8. Configuration
The device configuration can occur from the local ZVEI port or remotely from SAC, always by means of the DLMS protocol, as specified
in the provisions of the standards series UNI/TS 11291.
9. Maintenance
9.1. Ordinary
maintenance
9.1.1. Replacing the batteries
The RSE metrological battery is sized to assure an autonomy of more than 15 years under normal environmental and operating
conditions (see paragraph 10.3) and, therefore, it is not necessary to replace it.
The 169 MHz transmission battery is sized to assure an autonomy of more than 15 years under normal environmental and operating
conditions (see paragraph 10.3) and, therefore, it is necessary to replace it.
9.1.2. Firmware update
In case of release of a new firmware version, the notes that describe the changes made since the previous version are distributed.
The firmware update can easily be performed also remotely. Contact Samgas for further details
9.2. Device replacement and disposal
Upon removal, if necessary, the device has to be disposed of according to the regulations on the management of waste in force at the
time of disposal. (On the current date, the Italian Legislative Decree No. 152/2006, as amended and integrated, is in force in Italy).
