www.picoteinstitute.com
Picote Solutions Oy Ltd
5
TRANSPORT
The Super Midi Miller should be transported in a car or other vehicle and laid down and secured with ratchet straps to
prevent any sudden movements or accidents caused by hard braking or accident.
Never transport the machine with tool attached to the shaft
. Always retract the camera back to it’s housing during
transport. If using a pick
-
up or trailer to transport Picote Millers always suitable cover the unit to protect it from the
elements.
STORAGE
It is recommended that Picote Millers be stored indoors to protect them from rain and sunlight, and also in a constant
ambient temperature. The best way to store the machines is using the same box that the machine has been shipped in.
The Super Midi Miller should be strored under cover in b10
o
C to +40
o
C (50
o
F to 104
o
F). If the Super Midi
Miller has been stored in an environment colder than +10
o
C or 50
o
F , the machine should be stood at room
temperature for 24 hours before use.
If the Super Midi Miller has been stored for long periods of time (over 2
-
3 months), it should be checked and tested
according to the maintenance programme before use.
.
DISPOSAL
The Super Midi Miller motor, control box, electric wires and axle package including slip ring can be disposed in Europe at
Waste Electrical and Electronic Equipment (WEEE) collection points. Miller frame, reel and shaft can be recycled in
metal waste collection points. Outer casing of the shaft can be disposed of as plastic waste.
Always follow the local waste handling rules and regulation.
ENVIRONMENTAL
Operational Ambient Temperature Range:
-
10
o
C to 50
o
C (14
o
F to 122
o
F) frost and condensation free
Storage Ambient Temperature Range:
-
20
o
C to 60
o
C (
-
4
o
F to 140
o
F) frost and condensation free
Maximum Altitude:
2000m (6500 ft). Derate above 1000m: 1% / 100m
Maximum Humidity:
95% non
-
condensing
This section contains important safety information. Failure to comply could result in serious injury or death
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
ENVIRONMENT, TRANSPORT, STORAGE & DISPOSAL
