1.
Before performing any maintenance always check that the machine is fully turned off and unplugged.
2.
Always inspect the flexible shaft before each use. If there are potential weak points, or the shaft is damaged,
cut off the damaged length using a band saw or replace the entire shaft as needed.
3.
For safety and efficiency, always keep the machine and its motor, drive unit, ventilation and cooling slots clean.
4.
Remove handguard and check that the screws for the shaft socket are securely tightened (weekly).
5.
Check that all the bolts and screws on the machine are securely tightened.
6.
It is recommended that the oil in the bevel gear should be changed about every 12 months. Only use regular oil
developed for gearboxes.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
MAINTENANCE
10
ASSEMBLY UNDER THE HAND GUARD
CHANGING THE FLEXIBLE SHAFT
Only use the shaft and its outer casing specified by Picote Solutions. Order the replacement shaft from your
reseller. The flexible shaft is pre
-
treated with Picote Flexible Shaft Lubricant and the casing replaced prior to
shipping.
1.
Loosen the bolts holding the hand guard and remove the hand guard.
2.
Loosen the screws in the shaft socket that hold the shaft. Remove strain relief. Pull the old shaft out of the
machine.
3.
Insert new shaft. Before inserting the shaft inside the shaft socket, add strain relief. Verify that the shaft goes
all the way to the end. Tighten the screws.
4.
Mount the hand guard. Tighten the bolts.
www.picoteinstitute.com
Picote Solutions Oy Ltd
15
