Picote Solutions Oy Ltd
5
www.picoteinstitute.com
TRANSPORT
Always remove the Smart Mixer from the Mini Coating Pump and then remove the Mini Coating Pump from
the Miller for transport.
Mini Coating Pump should be transported in a car or other vehicle and laid down and
secured with ratchet straps to prevent any sudden movements or accidents caused by hard braking or accident.
Never transport the Miller with tool attached to the shaft
. On +C models, always retract the camera back to
it
’
s housing during transport. If using a pick
-
up or trailer to transport Picote Millers or Mini Coating Pump
always use a suitable cover on the unit to protect it from the elements
STORAGE
It is recommended that the Mini Coating Pump and Picote Millers be stored indoors to protect them from rain
and sunlight, and also in a constant ambient temperature. The best way to store the machines is using the
same box that the machine has been shipped in.
If the Mini Coating Pump or Picote Miller has been stored in an environment colder than +10
o
C or 50
o
F , the
machine should be stood at room temperature for 24 hours before use.
If the Mini Coating Pump or Picote Miller has been stored for long periods of time (over 2
-
3 months), it should
be checked and tested according to the maintenance programme before use.
DISPOSAL
Mini Coating Pump pump, electric wires and power supply can be disposed in Europe at Waste Electrical and
Electronic Equipment (WEEE) collection points.
The Mini Coating Pump frame can be recycled in metal waste collection points. Pump Housing, Delivery and
Supply Hoses can be disposed of as plastic waste.
Dispose of unused Resin by mixing the product in a well ventilated location using a non
-
flammable container.
The mixed product will generate heat while hardening. Follow the MSDS which can be found on the Picote
Institute.
Always follow local waste handling rules and regulations.
Picote 100% Solids Epoxy Resin and Fast Cure Resin:
Refer to MSDS for Environment , Transport, Disposal and Storage, available from Picote Institute
ENVIRONMENTAL
Operational Ambient Temperature Range:
-
10
o
C to 50
o
C (14
o
F to 122
o
F) frost and condensation free
Storage Ambient Temperature Range:
-
20
o
C to 60
o
C (
-
4
o
F to 140
o
F) frost and condensation free
Maximum Altitude:
2000m or 6500 ft. Derate above 1000m or 3280ft: 1% / 100m or 328ft
Maximum Humidity:
95% non
-
condensing
This section contains important safety information. Failure to comply could result in serious injury or death
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
ENVIRONMENT, TRANSPORT, STORAGE & DISPOSAL
