Picote Solutions Oy Ltd
23
www.picoteinstitute.com
STEP 4
STEP 3
Slide the larger brush onto the shaft followed by the supplied brush stopper.
Bring to the end and tighten both securely
Refer to the table on page 22 for the distance between the front and rear brush and
leave space between the brushes with no need for casing over the shaft. This will allow
for flexibility around bends.
The larger of the two brushes will be the brush at the tip of the shaft and is used for finishing the resin. The
closest brush helps to spread the resin and stabilize the brush set during coating.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
COATING SYSTEM ASSEMBLY | BRUSHES cont.
ONCE THE BRUSHES ARE ASSEMBLED, MOVE ON TO THE
DELIVERY HOSE AND CAMERA SET UP.
