Picote Solutions Oy Ltd
10
www.picoteinstitute.com
Please refer to the correct Miller
manual for more information
MINI MILLER 8/16
SIZE SHAFT RANGE ROTATING SPEED OUTPUT (kW) POWER SOURCE WEIGHT IP CLASS
752x519x389 8mm 16m 500
-
2900rpm 110V:1.1kW 110v or 230v 27kg
29.6x20x15.3
’’
1/3’’
50ft 230V:1.2kW 59.5lb
When is use, always lay the machine down horizontally on the floor as shown above. When not in use,
some non
-
hazardous Picote Flexible Shaft Lubricant might leak from the hand guard.
VOLTAGE
Ensure that the supply voltage is correct.
The voltage of the power source must
match the value given on the nameplate of
the machine.
FOOT PEDAL
The machine has an Operator Presence
Control or
‘
OPC
’.
When the control is no-
held down, the machine stops.
POWER SUPPLY
The machine should be connected only to a power
supply of the same voltage as indicated on the
nameplate, and can only be operated on single
-
phase AC supply.
EMERGENCY STOP
There is an Emergency Stop Button on the
machine. The power supply to the motor is cut off
when the Emergency Stop Button is pushed.
Always make sure the Emergency stop Button
is
pressed and completely unplug the machine when
the machine accessories (e.g. Cutter or Grinding
Mini Coating Pumps have been pre
-
set by the manufacturer
Picote Solutions accepts no liability for failures or accidents caused by tampering with or
changing of the manufacturer settings. The control box has been pre
-
programmed and
requires no additional adjustments.
Opening the box or changing the factory settings may cause damage and will void the warranty!
WARNING
!
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
PICOTE MILLERS | 8mm
(1/3”)
Shaft cont.
MINI CLEANER 8/16
SIZE SHAFT RANGE ROTATING SPEED OUTPUT (kW) POWER SOURCE WEIGHT IP CLASS
1122x712x466 8mm 16m 500
-
1500rpm 110V:1.5kW 110v or 230v 26.5kg
44x28x18
” 1/3”
50ft 230V:1.5kW 152lb
Note: Mini Coating Pump can also be used with the
Battery Mini Cleaner, Mini CC, Battery Mini
CC, Mini C , Battery Mini Miller and
Battery Mini C.
