unboxing
setup
first
rinse
let's
brew
after
brewing
ferment
your beer
dry
hopping
ra
ck &
carbona
te
serving
usa
ge &
care
glossary
pico instruction manual
82
83
Remove the white plastic shipping plug from the
center of the Serving Keg Bung Hole.
Sanitize the Serving Keg by pouring 1.5 cups of clean
tap water and 1.5 cups of 3% hydrogen peroxide.
Close the serving keg with the shipping plug. Shake the
keg and let it sit for 10 minutes, dump the keg into a
large bowl and set aside, then rinse the keg thoroughly
with clean water.
Note:
StarSan (available in home brewing stores) is an
effective alternative to hyrdrogen peroxide. Follow all
manufacturer's instructions.
₁
Attach a Keg Wand to the Racking Tube. Soak the
Racking Tube and Keg Wand for 5 minutes in the
large bowl of hydrogen peroxide you set aside
earlier. Rinse the Racking Tube and attached Keg
Wand with clean water.
Note:
If you are Keg Conditioning (naturally
carbonating) your beer (see steps 14-16), open
up the Carbonation Sugar Packet now and pour
the entire contents of packet into the sanitized
and dry Serving Keg.
proceed to next section:
rack the beer
₂
Summary of Contents for PICO
Page 83: ...brewingnotes brewingnotes ...