unboxing
setup
first
rinse
let's
brew
after
brewing
ferment
your beer
dry
hopping
ra
ck &
carbona
te
serving
usa
ge &
care
glossary
pico instruction manual
42
43
Slide the Keg Cozy over the Brewing Keg. Attach the
Pico hose with the Black Ball Lock Connector to the post
on the Brewing Keg marked “OUT”. Pull up on the outer
plastic ring of the BLACK Ball Lock Connector, place the
Connector on the OUT keg post, release outer plastic
ring and press down firmly on Ball Lock Connector.
Continue to press down on the Connector until it audibly
clicks into place. Repeat this procedure with the GRAY
Ball Lock Connector and the keg post marked “IN”.
Note:
Do not use the Metal Keg Lid while brewing, only
use the rubber Keg Seal. Make sure the white stopper is
not inserted in the Keg Seal center hole while brewing.
OUT
IN
CLICK
CLICK
₄
Remove the Water Reservoir Lid from the top
of the Pico. Fill the reservoir with approximately
one gallon of distilled water. Replace the Water
Reservoir Lid.
₅
ONE GALLON
Summary of Contents for PICO
Page 83: ...brewingnotes brewingnotes ...
