30
English
Dear Customer,
We thank you for having chosen one of our products, the fruit of extensive and continuous research for a superior product in terms of
safety, reliability and performance.
In this manual you will find all the information and advice you need to use your product as safely and efficiently as possible.
DT2010001-00
IIMPORTANT INFORMATION
DT2010021-00
REFERENCE STANDARDS:
DT2010028-02
Plans and diagrams are supplied as examples at the manufacturer’s discretion; in the pursuit of a policy of continuous development and
innovation the manufacturer may, without prior warning, make any modifications deemed appropriate.
This document is the property of Gruppo Piazzetta S.p.A.; it may not be divulged in part or in whole to third parties without written
permission from Gruppo Piazzetta S.p.A. Gruppo Piazzetta S.p.A. reserves all its statutory rights.
• This manual has been prepared by the manufacturer and
constitutes an integral part of the product, and must accompany it
throughout its life. In the event of sale or relocation of the product
make sure this booklet accompanies it, since the information
contained in it is addressed to the purchaser and to anyone
involved in the installation, use and maintenance of the product.
• Read the instructions and the technical information contained in
this manual carefully, before proceeding with installation, use or
any repairs.
• The observance of the instructions and technical information in
this manual guarantees the safety of the user and the product, a
more efficient operation and an increased lifespan.
• The product’s installation and use should conform to the
manufacturer’s instructions and to local bylaws.
• Careful planning and safety analysis on the part of Gruppo
Piazzetta S.p.A. have resulted in a safe product. However, when
carrying out any operation we recommend that you follow
carefully the instructions contained in this manual, and that you
keep it at your disposal.
• Before installing the product read all instruction booklets relevant
to the cladding, the ventilation kit and any other accessory.
• Be especially careful when moving any ceramic components.
• Check that the floor where the product is to be installed is exactly
level.
• To help correct potential unevenness and irregularities a sheet of
adhesive fibreglass accompanies the product.
• Do not block the electrical socket; it should be close to the unit
but accessible.
• The wall where the product is to be placed should not be of wood
or any other flammable material; furthermore it is important to
maintain safety distances (refer to section entitled ‘Prevention of
domestic fires’ contained in the stove’s manual for use and
maintenance).
• The assembly of the cover should be undertaken by two people
(follow the assembly instructions in the attached booklet).
• Keep children informed of safety measures to be followed when
the stove is operational and at other times.
UNI EN 832 . . . . . . . . . . . . . . . . . . . . . . . . Thermal performance of buildings - Calculation of energy use for heating
UNI EN 13240 . . . . . . . . . . . . . . . . . . . . . . Roomheaters fired by solid fuel - Requirements and test methods
UNI 10683 . . . . . . . . . . . . . . . . . . . . . . . . . Heating appliances fired by wood or other solid biofuels
UNI EN 13384 . . . . . . . . . . . . . . . . . . . . . . Chimneys - Thermal and fluid dynamic calculation methods
UNI 10847 . . . . . . . . . . . . . . . . . . . . . . . . . Chimneys for generators feeded with liquid and solid flues - Maintenance and inspection
Guidelines and procedures
UNI EN 1856-1-2 . . . . . . . . . . . . . . . . . . . . Chimneys – Requirements for metal chimneys
UNI EN 1443 . . . . . . . . . . . . . . . . . . . . . . . Chimneys – General requirements
UNI 7129 . . . . . . . . . . . . . . . . . . . . . . . . . . Gas plants for domestic use fed by network distribution
DIN 18 891 . . . . . . . . . . . . . . . . . . . . . . . . Solid-fuel stoves with flue
DIN 51731 class of measurement HP2 . . Fuels