PIAGGIO X10 350ie Executive Owner'S Manual Download Page 40

Page: 40 / 118

01_46

Power supply socket (01_46)

There is a 12V socket inside the glove-box, on the right side.

The socket can be used to feed appliances with power below 180 W (mobile phones,
hand lamp, etc.).

CAUTION

PROLONGED USE OF THE PLUG SOCKET MAY DISCHARGE THE BATTERY.

CAUTION

THE PLUG SOCKET WORKS ALSO WITH THE KEY IN THE «OFF» POSITION:
REMEMBER TO DISCONNECT ANY DEVICE FROM THE SOCKET TO AVOID
FULL DISCHARGE OF THE BATTERY.

01_47

USB socket (01_47)

There is a USB socket inside the glove-box, on the left side of the dashboard.

To use it, remove the protective cap. Cover the socket with the cap to prevent water
and/or moisture from damaging it.

CAUTION

THE USB SOCKET SUPPLIED IS COMPATIBLE WITH DEVICES OF THE FOL-
LOWING BRANDS: Apple iPhone, Apple iPod, Apple iPod Nano, Apple iPod

1 Vehicle

Summary of Contents for X10 350ie Executive























































































































Search results

Summary of Contents for X10 350ie Executive

Reviews:

Related manuals for X10 350ie Executive

Brands by name

Popular brands

PIAGGIO X10 350ie Executive, Owner'S Manual

Search results

Summary of Contents for X10 350ie Executive

Reviews:

Related manuals for X10 350ie Executive

Brands by name

Popular brands