A six pole magneto - nominal voltage 6 V - supplies alternating current to the
electrical equipment. The controls (switching levers, horn button) are located on
the handlebars, R. H. into the main light and dip switch (Fig. 22). The engine
cut-out button is located on the frame, under the hook for bag (see Fig. 2).
This equipment consists of the following lighting and signaling devices:
The headlamp
Diameter 130, has a 25/25 W bulb (main and dipped beam)
and a 5 W bulb (pilot light and front parking light).
The rear lamp
With red reflector, is provided with a 5 W bulb (red pilot
light and light for registration plate) and a 1O W bulb
(Stop light).
Speedometer light
And checking light for headlamp are both 6 V - 0,6 bulbs.
Horn.
Fig. 22 - Light and dip switch.
Switching lever:
0:
lights off.
1:
pilot light and tail lamp on.
2:
head light, front parking light and tail lamp on).
A:
Switch (dipped and main beam).
B:
Horn button
Notice:
For the Engine cut-out button see Fig. 2 on page 7
