OPERATING INSTRUCTIONS
Operation
Instructions
STARTING
Carry out the operations indicated on fig. 6. Do not
use the choke when the engine is warm; as soon as
the engine is running smoothly bring the starter
control back to its normal position.
SETTING THE SCOOTER IN MOTION
With the engine running at idling speed declutch
and rotate the gear change twist grip to the position
of first gear (fig. 6). For setting the vehicle in motion
slowly let in the clutch and gradually open the
throttle.
GEAR CHANGE
Close the throttle, declutch and rotate the gear
change grip to a higher or lower gear, as the case
may be (fig. 6).
STOPPING THE ENGINE
Before stopping the engine change to <neutral>
and then switch off the ignition (Fig. 2).
NOTES
In case of hard starting see page 17. When it is necessary to decelerate do not hesitate
in changing down.
A:
Open the fuel tap -
B:
Selector in neutral
C:
Pull out the starter control (with cold
engine) -
D:
Bring throttle twist grip to idling position -
E:
Operate kick starter.
Fig. 6 – Operation for starting
