OPERATING AND MAINTENANCE: Common operations to carry out
Fig. 12 – Dismantling the spare wheel
Operation
Instructions
SPARK PLUG REMOVAL
Remove engine cowl (Fig. 7), disconnect the H. T.
lead and extract the spark plug using the box
wrench as indicated in Fig. 15.
CHANGING OIL IN GEAR CASE
Drain off through hole (Fig. 16).
Clean carefully the
plug of said hole
. Introduce a small quantity of
flushing oil, run the engine a few minutes to ensure
thorough circulation and cleaning and drain off
again. Afterwards refill gear case with about 250
grs. of new oil (up to level of filling hole).
NOTES
On reassembling the spark plug ensure that it is fitted into the threaded hole, at the
correct inclination. This operation of changing oil should be carried out with
warm engine
.
