CLEANING THE VEHICLE
1)
Engine
For cleaning the exposed surface of the engine use paraffin, a brush and clean rags.
2)
Bodywork.
Washing.
Painted parts should be washed down using a low pressure hose. Do not use a high
pressure system as grit may be forced into the paint. When the dirt and grime
becomes soft, sponge off using one of the <car type> shampoos available (use a
product of the type Rolene and Teepol, which are employed in aqueous solution, 3-
5% by weight). First, lightly wash the painted surface of the scooter, in order to avoid
scratching. Thoroughly rinse with plenty of water. Dry off using a clean chamois
leather to eliminate water marks.
Spots.
To remove spots caused by tar, grease, insects, etc, rub gently with a soft cloth
dipped in oil or turpentine. More persistent marks can he removed with a solution of
warm water and car shampoo. Carry out this procedure periodically, to eliminate
permanent paintwork damage.
Polishing.
If after washing, as previously described, the original condition is not restored, apply
evenly a thin coat of good. quality wax polish and shine with a soft cloth, rubbing
gently in a side to side manner.
