PIAGGIO NRG 50, User Manual

Page: 101 / 275

- Fit the seeger ring.
- Reposition the starting lever in its seat and tight-
en the screw.
Before remounting the transmission cover on the
carter, make sure that all indicated points have
been lubricated.
Removing the driven pulley shaft bearing
- Slightly heat the crankshaft from the inside side
to avoid damaging the coated surface and use the
driven pulley shaft or a pin of the same diameter
to remove the bearing.
N.B.
IN CASE OF DIFFICULTY A STANDARD 8MM-INSIDE DI-
AMETER EXTRACTOR CAN BE USED.
NRG 50
Engine
ENG - 101