PIAGGIO LUM Beverly Sport Touring 350 ie Manual Download Page 28

Page: 28 / 92

Checks

Before using the vehicle, check:

. That the fuel tank is full.

. The front and rear brake fluid level.

. That the tyres are properly inflated.

. Correct functioning of daylight running lights, headlight, and turn indicators.

. The correct functioning of front and integral brakes.

. The oil level in the gearcase.

. The engine oil level.

. Coolant level

02_01

Refuelling (02_01)

Raise the lock protection tab on the fuel tank cap. Insert the key and turn anticlockwise
to remove the cap.

WARNING

SWITCH OFF THE ENGINE BEFORE REFUELLING WITH PETROL.

PETROL IS HIGHLY INFLAMMABLE.

DO NOT SMOKE AND KEEP NAKED FLAMES AT A DISTANCE:FIRE HAZARD.

DO NOT INHALE FUEL FUMES.

2 Use

Summary of Contents for LUM Beverly Sport Touring 350 ie





























































































Search results

Summary of Contents for LUM Beverly Sport Touring 350 ie

Reviews:

Related manuals for LUM Beverly Sport Touring 350 ie

Brands by name

Popular brands

PIAGGIO LUM Beverly Sport Touring 350 ie, Manual

Search results

Summary of Contents for LUM Beverly Sport Touring 350 ie

Reviews:

Related manuals for LUM Beverly Sport Touring 350 ie

Brands by name

Popular brands