manualshive.com logo in svg

PIAGGIO LUM Beverly Sport Touring 350 ie, Manual, Page: 82 / 92

Share
Download
PIAGGIO LUM Beverly Sport Touring 350 ie Manual Download Page 82

05_01

Warnings (05_01)

WARNING

TO PREVENT ACCIDENTS AND TO GUARANTEE PROPER STABILITY, PER-
FORMANCE AND SAFETY, RIDE THE VEHICLE VERY CAREFULLY WHEN IT IS
FITTED WITH ACCESSORIES OR WITH UNUSUAL LOADS.

WARNING

 

IT IS ALSO RECOMMENDED THAT ORIGINAL PIAGGIO SPARE PARTS BE
USED, AS THESE ARE THE ONLY ONES OFFERING YOU THE SAME QUALITY
GUARANTEE AS THOSE INITIALLY FITTED ON THE SCOOTER. THE USE OF
NON-ORIGINAL SPARE PARTS RENDERS THE WARRANTY VOID.

WARNING

 

PIAGGIO MARKETS ITS OWN LINE OF ACCESSORIES THAT ARE RECOG-
NISED AND GUARANTEED FOR USE. IT IS THEREFORE ESSENTIAL TO CON-
TACT AN AUTHORISED DEALER OR SERVICE CENTRE IN ORDER TO CHOOSE
AND FIT ACCESSORIES CORRECTLY. THE USE OF NON-ORIGINAL ACCES-
SORIES MAY AFFECT THE STABILITY AND OPERATION OF YOUR VEHICLE
AND REDUCE SAFETY LEVELS WITH POTENTIAL RISKS FOR THE RIDER.

 

NEVER RIDE THE VEHICLE EQUIPPED WITH ACCESSORIES (PANNIERS, TOP
BOX AND/OR WINDSHIELD) AT A SPEED HIGHER THAN 110 km/h.

82

5 Spare parts and accessories

Summary of Contents for LUM Beverly Sport Touring 350 ie





























































































Reviews:

No comments