PIAGGIO Liberty 125, Workshop Manual, Page: 147 / 212

- Secure the tube connection to the caliper with the
required torque.
- Before reassembly, the parts must be perfectly
clean and bear no traces of oil, diesel fuel,
grease , etc.. They must therefore be washed thor-
oughly in denatured alcohol before proceeding.
Immerse the seals in brake fluid ; the use of pro-
tective agent PRF1 is tolerated.
CAUTION
RUBBER PARTS SHOULD NEVER BE LEFT IN ALCOHOL
FOR LONGER THAN 20 SECONDS.
AFTER WASHING, THE PIECES MUST BE DRIED WITH A
BLAST OF COMPRESSED AIR AND A CLEAN CLOTH.
Locking torques (N*m)
Screw tightening calliper to the support
20 ÷ 25
Calliper to tube connection
8 ÷ 12 Nm
1 DUST GUARDS
2 SEALING RINGS
3 PLUNGERS
4 O-RING GASKET
Front brake disc
Removal
- Remove the front wheel loosening the axle
clamp.
-Remove the six fastenings of the disc.
Refitting
-When refitting, position the disc correctly making sure that it rotates in the right direction.
Locking torques (N*m)
Disc tightening screw 8 - 12
Liberty 125 - 200 4tempi
Braking system
BRAK SYS - 147