PIAGGIO Liberty 125, Workshop Manual, Page: 107 / 212

Locking torques (N*m)
Locking torque 11 ÷ 13
- Insert the chain tensioning screw, together with the spring and washer, tightening it to the prescribed
torque.
Locking torques (N*m)
Locking torque 5 - 6
- Adjust the valve clearance.
- Fit the spark plug
Electric characteristic
Recommended spark plug:
CHAMPION RG4HC
Electrode gap
0.8 mm
Locking torques (N*m)
Locking torque
12 - 14
- Assemble the casing sealing gasket on the head.
On the fitting direction, use the supplements on the
timing side as reference.
- Assemble the screw fixing the housing to the
crankcase to the specified torque and the 2 self-
threading screws joining the half-shells.
- Take care that the gasket is well inserted in its
housing during the assembly stage.
- Place the spark plug access cap.
Locking torques (N*m)
Locking torque
3 ÷ 4
- Fit the inlet manifold and lock the 2 screws to the
specified torque.
- Fit the carburettor onto the inlet manifold and lock
the clamp
N.B.
FIT THE CARBURETTOR THROUGH THE SUPPLEMENT
ON THE MANIFOLD.
Locking torques (N*m)
Locking torque
11 ÷ 13
Liberty 125 - 200 4tempi
Engine
ENG - 107