PIAGGIO beverly 500 User Manual Download Page 81

Page: 81 / 84

Product

Description

Specifications

between -20 C and +120 C; NLGI 2; ISO-L-
XBCIB2.

06_01

Selènia Moto Rider (06_01)

PIAGGIO-GILERA

rides with

SELENIA MOTO RIDER

The technology and quality of

FL Selenia

for a range of high performance products.

Thanks to the co-operation between

FL Selenia

and Piaggio Engineering, the

Selenia

Moto Rider products

give the Piaggio/Gilera scooters protection and safety in every

operating situation.

A broad range of lubricants and functional fluids to satisfy the demands of every mo-
torcyclist, tested on the Piaggio/Gilera engines from the moment they leave the
production line and selected to maximise reliability and performance.

The

Selenia Moto Rider

product range is distributed by the Piaggio/Gilera service

network and top specialised sales outlets.

6 Programmed maintenance

Summary of Contents for beverly 500





















































































Search results

Summary of Contents for beverly 500

Reviews:

Related manuals for beverly 500

Brands by name

Popular brands

PIAGGIO beverly 500, User Manual

Search results

Summary of Contents for beverly 500

Reviews:

Related manuals for beverly 500

Brands by name

Popular brands