N.B.
IF DURING A NON-DEMANDING RIDE THE COOLANT WARNING LIGHT COMES
ON, SHUT OFF THE ENGINE AND ALLOW IT TO COOL DOWN. THEN CHECK
THE COOLANT LEVEL; IF THE LEVEL IS NOT CORRECT, CONTACT AN AU-
THORISED SERVICE CENTRE.
WARNING
TO AVOID THE RISK OF SCALDING, DO NOT UNSCREW THE EXPANSION
TANK COVER WHILE THE ENGINE IS STILL HOT.
WARNING
TO PREVENT AVOID HARMFUL FLUID LEAKAGE WHILE RIDING, ENSURE
THAT THE LEVEL NEVER EXCEEDS THE MAXIMUM VALUE.
TO ENSURE CORRECT ENGINE OPERATION, KEEP THE RADIATOR GRILLE
CLEAN.
03_14
Checking the brake oil level (03_14, 03_15)
The brake fluid tanks are located on the pumps under the front handlebar cover(front
on the right-hand side, rear on the left-hand side).
The procedures to checking the brake fluid level for the front and rear brakes are
identical.
Proceed as follows:
1
. Place the scooter on its centre stand and make sure the handlebar is centred;
2
. Loosen screw "
A
" and remove cover "
B
";
3
. Check the fluid level through the respective sight glass "
C
". A certain lowering of
the level is caused by wear on the pads.
44
3 Maintenance
Summary of Contents for beverly 500
