01_12
01_13
WARNING
LOSING THE RED KEY PREVENTS ANY REPAIRS OF THE "PIAGGIO IMMOBIL-
IZER" SYSTEM AND THE ENGINE CONTROL UNIT.
WARNING
KEEP THE "CODE CARD" AND THE RED HANDGRIP KEY IN A SAFE PLACE
(NOT ON YOUR VEHICLE).
Immobilizerdevice enabled indicator led (01_13)
Activation of the «
PIAGGIO IMMOBILIZER
» system is signalled by a flashing warning
light «
G
» (see «Analogue instrument panel» section).
In order to reduce battery discharge, the indicator LED turns off automatically after 48
hours of uninterrupted functioning.
Should the system fail, different LED flashing patterns will be provided by an
author-
ised Piaggio-Gilera service centre
with information on the type of fault detected.
Operation
Every time the starter key is removed in the "
OFF
" or "
LOCK
" position, the safety
system activates the immobilizer system. Turning the key to "
ON
" disables the engine
lock, provided that the safety system recognises the code transmitted by the key. If
the code is not recognised, turn the key first to "
OFF
" and then to "
ON
"; if the lock
cannot be disabled, try with the other key supplied (red-coloured). If the engine cannot
be started, contact an
authorised Piaggio service centre
, which is provided with the
electronic equipment required to detect and repair the system. The immobiliser is ac-
tivated even when the engine is switched off with the engine cut-off switch. This
happens even if the starter key is in position "
ON
". When additional keys are required,
please note that data storage (up to 7 keys max.) must be done on all keys, both new
ones and existing ones. Take the key with the red grip and all the black keys supplied
to an
authorised Piaggio service centre
. The codes of keys not submitted for the
13
1 Vehicle
Summary of Contents for beverly 500
