PIAGGIO beverly 500, User Manual

Page: 15 / 84

Final step - red key
After pulling out the last black key, insert the red key again and turn it to " ON " (this
operation should be performed within 10 seconds of pulling out the previous key).
Leave it in this position for 1 to 3 seconds and return it to the «
OFF » position.
Proper programming check
Insert the red key disabling the transponder (i.e., tilt the key cap by 90°) and turn the
key to "
ON ". Perform the engine start-up operation. Ensure that the engine does not
start. Insert the black key and repeat the start-up operation. Check that engine starts.
WARNING
SHOULD THE ENGINE START WITH THE RED KEY (WITH TRANSPONDER OFF),
OR IN THE EVENT OF WRONG OPERATION DURING PROGRAMMING, REPEAT
THE PROCEDURE FROM THE BEGINNING.
01_14
Accessing the fuel tank (01_14, 01_15)
Insert the key into the switch and press down until the glove box opens. In the event
that the key switch is in «
LOCK », turn the key to « OFF » or « ON » before pressing
down. Press lever « B » and open the cover over the fuel tank cap « C ».
15
1 Vehicle