PIAGGIO Beverly 400 E5, Service Manual

Page: 156 / 159

ASR "3" system deactivation icon
Icon "ASR OFF": on steady with engine started,
ASR system not working or not calibrated or vol-
untarily deactivated.
ASR/ASR OFF ICON OPERATION MODE
ASR System status ICON with engine off
or key "ON"
ICON with engine on ASR working
ACTIVE and calibrated "ASR" icon: 1Hz slow
flashing
Icons switched off "ASR" icon: 5Hz fast
flashing
ACTIVE not calibrated Icon "ASR OFF": on
steady
Icon "ASR OFF": on steady "ASR" icon: 5Hz fast
flashing
ASR voluntarily deactivated Icon "ASR OFF": on
steady
Icon "ASR OFF": on steady -
ASR system not working Icon "ASR OFF": on
steady
Icon "ASR OFF": on steady -
Programming phase (successful) - "ASR" icon: 1Hz slow flashing (then
when the engine is started, the icons
turn off if the programming is suc-
cessful)
-
Programming phase (failed) Icon "ASR OFF": on steady when en-
gine is started if the programming
has failed
-
Manual calibration procedure of the ASR sys-
tem.
In order to maintain the efficiency of the ASR sys-
tem when one or both tires are replaced, a cali-
bration procedure of the ASR system must be
performed as follows on a straight flat stretch of
road:
1. With vehicle at a standstill and engine off.
2. Pull the brake lever, turn the starter switch to
" ON " and start the engine.
3. Disconnect the ASR system by pressing the
corresponding button for at least 1 second with the
engine running; The "ASR OFF" icon will be-
come steady on , initially it was off as the ASR
system had already been calibrated in the past.
Braking system
Beverly 400 E5
BRAK SYS - 156