User Manual
P725T0010, applies to P-725
CBo/KSch, 8/27/2020
Physik Instrumente (PI ) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany
Page 40 / 40
Phone +49 721 4846-0, Fax +49 721 4846-1019, Email
P-725.xCD, P-725.1CDE2, P-725.xCA, P-725.CDD
Fig. 19:
D-sub 7W2 (m) plug connector (front view)
Pin
Signal
Function
A1 inner
conductor
Input
Piezo v
A2 inner
conductor
Output
Probe sensor signal
(immovable part of the capacitive sensor)
A2 outer
conductor
GND
Shield
1
Bidirectional
Data line for ID chip
2
GND
Shield of Target
Ground of ID chip when switched on
3
Input
Piezo voltage –
4
---
Not connected
5
Input
Target sensor signal
(movable part of the capacitive sensor)
The connector shell is connected to the cable shield.
Old Equipment Disposal
In accordance with EU law, electrical and electronic equipment may not be disposed of in EU
member states via the municipal residual waste.
Dispose of your old equipment according to international, national, and local rules and
regulations.
In order to fulfill the responsibility as the product manufacturer, Physik Instrumente (PI) GmbH
& Co. KG undertakes environmentally correct disposal of all old PI equipment made available on
the market after 13 August 2005 without charge.
Any old PI equipment can be sent free of charge to the following address:
Physik Instrumente (PI) GmbH & Co. KG
Auf der Roemerstrasse 1
76228 Karlsruhe, Germany
