User Manual
P725T0010, applies to P-725
CBo/KSch, 8/27/2020
Physik Instrumente (PI ) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany
Page 16 / 40
Phone +49 721 4846-0, Fax +49 721 4846-1019, Email
Fig. 4: P-721.xxQ: Thread adapter, microscope side (view from below)
1: Recesses for key tool (narrow side)
2: Spring washer
3: Clamping ring
Fig. 5: P-721.xxQ: Flat wrench (included in the scope of delivery of the thread adapter set)
1: Narrow side of the key tool
2: Wide side of the key tool
Mounting the P-721.xxQ thread adapter set
NOTICE
Possible damage due to excessive torque!
Only moderate torque is required to fix the thread adapter in the PIFOC positioner on the
objective side.
Use the key tool supplied for tightening the thread adapter on the objective side.
Requirements
You have read and understood the safety precautions (p. 6).
The P-725 is
not
connected to the electronics.
Tools and accessories
P-721.xxQ QuickLock thread adapter set (p. 11)
Key tool supplied (see Fig. 5, p. 16)
Tightening tool supplied (see Fig. 3, p. 15)
